She's coming home tomorrow!!

I just heard back from ToughCoat and I can pick up my frame in the morning. This is going to be a real eye catching frame for sure. The plastics have big shoes to fill to fit on this bike now. 

Here is the process:

Primed Frame

Primed Parts

Coated Frame

Coated Parts

And a close up.

I'll post some more pictures tomorrow after I get it home. 

T minus 10 days

10 days from now and I'll be able to pick up the powder coated frame. I'll be danged if everyone hasn't gotten on the red frame band wagon now. My case in point:

2012 Honda Fury

Mother Honda couldn't be out done by the Kawasaki Mean Streak

And this is just a sweet custom that I found surfing the net

I can't wait to add my '78 Honda Goldwing to the mix. At least I cant find a picture of one of them with the same color scheme yet.

Powder Coated Frame

I've played around with a lot of different color schemes for the '78 Goldwing frame and I've settled on this:
This is a sand rail frame that ToughCoat powder coating did a while back. After talking to the owner he has the color in stock and next week I'll get it up to him. I'm having him do the frame, rear swing arm, center stand, kickstand and steering knuckle. If I had more money and patience I might get really crazy and do the wheels and if I did that I'd want to black out the engine and on and on and on. That's what happens when you give a mouse a muffin.

Can't wait to post pics of my own frame.

In the mean time I've cleaned up the gauge cluster, straightened the radiator fins(using two small flat tip screwdrivers to carefully stand them back up straight) and polished a fist full of nuts and bolts.

When I pulled all the extra bolts from the frame I placed them in ziplock bags and numbered them like on the Goldwing service manual frame diagram:

I also drilled out the rivots on the original Honda GL1000 label on the neck of the frame so I can place it back on after the powder coating. Trying to preserve some of the history of this vintage Goldwing.

Kind of a big feller

You really don't get the magnitude of this GL1000 engine until you see it out of the frame.

(it doesn't help that it is pictured with a huge pile of junk behind it)

The vertically opposed 4 cylinder design makes this engine very wide and flat. The engine and transmission measures approximatly:

Height: 15 inches

Width: 26 inches

Depth: 20 inches

Days Three and Four

These two days aren't very well documented with pictures; except for a few that I took of the wiring and cable routes so that I can get them back in the right places when it is time for reassembly.

I started by removing the gauge cluster. In the process I tagged the bird nest of wires that go to the headlight assembly, took several pictures of which direction the throttle cable, clutch cable and choke cable move around the frame. The gauges look really good and will clean up nicely.

I continued by disconnecting all the wire harnesses and removed the trunk line of wire from the bike. I took a few pictures mapping it's path as well. I'll clean and recover it before putting it back on.

I at long last was able to remove the gas tank. It took removing all the electrical and the rear brake lines before it would clear the frame. Note to self: put the tank in first.

I got the rest of the front end tore down. Front brake lines and calipers, which I noticed were mounted backwards by who ever put them on last. That explains why the front brake wouldn't release when we were trying to load it in the truck. Here is the pile that was left over.

I finished removing the radiator and fan shroud. I nearly busted my 17mm gearwrench trying to undo the motor mount nut only to find out that the nut is welded and I was to undo the bolt instead. With the radiator and upper mounts removed it was easy to unbolt the carb set and slip the whole unit out in one piece. I turned the bike around and started unbolting the engine.

The Goldwing frame actually has opens up on the bottom of the left hand side. The engine is too big to get in and out otherwise. I placed the bike jack under the engine and jacked it up just enough to take the weight off the bolts. Once all was free I found that I had forgotten to take off the drive shaft and that one small spring clip was keeping me from removing the engine and I don't own a pair of ring expanders. Off to dear ol Dad's house.

After making several futile attempts to remove the ring myself, I called on Dad again to help me. Bettween Dad expanding the ring and my gentle persuasion, from the bottom of the ring with a flat tipped screwdriver, it came loose. At long last. A naked frame.

Day Two of Dis-assembly

So I didn't get enough of tinkering in the garage the other day and the bike wont strip itself so here is some more of my destruction.

The rear tire came of quite easily after taking off the rear brake caliper and the 3 bolts on the final drive. If you are attempting this you'll want to use a regular box end wrench in order to get in tight enough to the drive line. I have been using my GearWrench ratcheting wrenches for almost everything on the bike but the final drive bolts are too tight against the column.

Here is the rear wheel off the bike and the final drive hub:




Again to the front, I removed the air filter box and packed a clean rag into the intake on the carbs to keep things from falling in it.




I loosened the motor mount and attempted to take off the fuel tank.



As you can see in the picture, the Goldwing was built around the fuel tank. It seems that mother Honda wanted more then anything to make sure that it had a huge fuel tank nestled tightly at the heart of the Goldwing. This could easily be an engineering marvel equal to the Great Wall of China or the Sphinx. There is only one bolt holding the massive 5 gallon tank in place. The rest of its support is provided simply by being wedged into the frame. As you can see the tank bulges to fill every possible void of space on this bike.

On the right hand side of the tank there is a drain bolt. I figured that this would be a good idea before removing the petcock and attempting to get this tank off the bike. What I didn't realize was that the tank in mention was nearly full. I must have drained about 4 gallons of skunky orange gasoline out of the tank. Here is a last of what I couldn't fit in old Anti-freeze jugs to be saved and used as 'Boy Scout Water'.



The end result looks like this:



I ended up running to the local grocery store to by a bag of cat litter to soak up all the fuel that spilled while I was draining the tank. As it turns out the fuel will drain along every surface of the bike before falling to the bucket or floor below. With almost 4 gallons in buckets I probably had another gallons worth on the ground.

I've come to the conclusion that the tank was never designed to be removed and that I should continue to the front forks or the motor. I've tagged a lot of the lines and will need to do the same with the electrical. I am going to map the cables with pictures so I get them back to where they need to be routed when I go to put this little beauty back together. Lucky for me I have her big sister right there to use as a reference.

Long Awaited Update

Now that the '78 Goldwing and I have had a little time apart it is time to get reacquainted. I left this project with cleaning up the rear fender's chrome. I removed the entire fender and rear shocks. I started buffing the rust off the chrome and then decided that it would have all winter to rust again. So, I just buffed it up with Eagle One and will leave it until spring. The shocks came off very easily however I broke both of the air lines taking them off because they were so cold and brittle. Just as well. One of the lines had a hole in it and they would need to be replaced anyways.



Moving forward, I next removed a lot of the wiring and the coolant lines in order to remove this large hunk of metal that everything hooks to. That is the technical term for this piece:



Next came off the hand controls and the handle bars. I am considering changing out the OEM handle bars for drag bars. It is a little challenging to find 7/8" drag bars.



This is the resulting mess that will be left behind for another day.